丁晴手套專用鈣漿
應用領域：廣泛應用于丁腈手套填充
其特點： 粒徑小，分布均勻，不團聚，不沉降，穩定性好，易分散。 降低生產成本。我公司產品如下。
| 物化指標產品規格 | 白度（%） | 粒度 （-2μm） | PH值 | 酸不溶物（%） | 固含 % |
| JN-DQ90 | ≥97.0 | ≥95 | 9-13 | ≤0.15 | 50±1 |
根據客戶要求、質量不同、一般納米丁腈鈣漿添加量在5-15%左右（折干記）。使用非常簡單， 使用時丁腈膠及輔料添加好后，最后添加納米丁腈鈣漿，攪拌均勻（一般1-2小時）即可上線。
使用方法： 1.首先將固含量50%左右的丁腈鈣漿料，稀釋到所需使用丁腈膠的固含量；
2.將稀釋好的丁腈鈣漿料按比例加入丁腈膠中，攪拌均勻；打到出手套的膠池內,待出手套。
建議使用添加量：≥4.5克的丁腈手套，添加量在5%左右。
≥7克的丁腈手套，添加量在10%左右。
≥10克的丁腈手套，添加量在15%左右。
包裝方式：25KG液體專用袋包裝；1.5噸桶裝；
儲存方式：防曬、防凍（0度以上）
Application: Widely used in nitrile glove filling.
Its characteristics: small particle size, uniform distribution, no agglomeration, no settlement, good stability, easy to disperse. Reduce production costs. Our products are as follows.
| Product specification | whiteness （%） | Particle size（-2um） | PH | The acid insolubles （%） | Solid content （%） |
| JN-DQ90 | ≥97.0 | ≥95 | 9-13 | ≤0.15 | 50±1 |
According to customer requirements, different quality, the general nano nitrile calcium paste added in about 5-15% (fold dry note). It is very simple to use. When nitrile glue and auxiliary materials are added, nano nitrile calcium slurry is finally added, and the mixture is evenly stirred (generally 1-2 hours) to go on line.
Method of use:
1. First of all, the calcium butadiene slurry with solid content of about 50% is diluted to the solid content of butadiene glue required;
2. Add the diluted calcium butadiene slurry to the butadiene glue in proportion and stir evenly; Hit the glove out of the glue pool, wait out the glove.
Recommended dosage: ≥4.5 g nitrile gloves, the dosage is about 5%.
Nitrile gloves (≥7 g), adding about 10%.
Nitrile gloves ≥10 g, add about 15%.
Packing method: 25KG liquid bag; 1.5-ton barrel;
Storage: sunscreen, anti-freezing (above 0 degrees)
